This Waterfall Spray Booth has been designed to meet the ever increasing need to protect our environment. The water wash spray booth works on the principle of a curtain of continuous recycling water running down the rear face of the spray booth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable stainless steel pre filter and finally into a washable filter bag. The excess glaze is washed into the tank and can at a later date be reclaimed depending on the type and colour of the glaze. There is a ball valve to allow the water to be drained and the contents of the tank removed. Any glaze materials can also be removed and disposed of safely. The booth is mounted on four castor wheels. The 7800 is primarily designed to be used by the studio potter and educational faculties for low volume production, therefore the booth does not need ducting to atmosphere making it portable around the studio environment.

This spray booth uses a sophisticated baffle system to prevent water take through into the filter bag, they are designed to be used with water based material only, but can be adapted if required for solvents.  If the spray booth is to be used in a production environment it may be necessary to duct to the atmosphere, please contact our technical department is you require further advice.

Technical data:

Height: 1580mm approx.
Width: 820mm approx.
Depth: 1290mm approx.
Fan: 2000CFM
Air extraction: 250 Cu Ft/min
Steel construction
Internal parts: stainless steel
Water tank: Polypropylene
Switchgear: Thermal overload protection
Weight: 118 kg approx.
Power: 220/240v 5OHz
Hood internal dimensions: 638mm x 625mm x 420mm deep.
Working depth: 350mm

The 7805 Waterfall Spray Booth is a larger version of our 7800 model. This unit has a hood internal size of 1 metre x 1 metre and is equipped with a separate water tank to aid cleaning.

The Waterfall Spray Booth has been designed to meet the ever increasing need to protect our environment.  The water wash spray booth works on the principle of a curtain of continuous recycling water running down the rear face of the spray booth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable stainless steel pre filter and finally into a washable filter bag.  The excess glaze is washed into the tank and can at a later date be reclaimed depending on the type and colour of the glaze.  There is a ball valve to allow the water to be drained and the contents of the tank removed.  Any glaze materials can also be removed and disposed of safely. The booth is mounted on four castor wheels.  The 7805 is primarily designed to be used by the studio potter and educational faculties for low volume production, therefore the booth does not need ducting to atmosphere making it portable around the studio environment.

This spray booth uses a sophisticated baffle system to prevent water take through into the filter bag, they are designed to be used with water based material only, but can be adapted if required for solvents.  If the spray booth is to be used in a production environment it may be necessary to duct  to the atmosphere, please contact our technical department is you require further advice.

Technical data:

Size
Height: 1880mm
Width: 1200mm
Depth: 1585mm approx.
Steel construction
Internal parts stainless steel, Water tank/hood Polypropylene

Switchgear
Thermal overload protection
Weight: 180kg approx.
Power 220/240v 5OHz
Air extraction 250cfm/min

Hood internal dimensions: 1000mm x 1000mm x 585mm deep.
Working depth: 500mm.

This Spray Booth has been designed for use in the classroom or small pottery workshop. The booth is fitted with a 12" electric extractor fan which produces an air velocity of 250cfm at the face.  A washable heavy duty filter is fitted as standard and a stand is also supplied as standard.

Technical data:

Spray Booth
Width: 24” (610mm) approx.
Height: 24” (610mrn) approx,
Depth: 30” (750mm) approx.

Stand
Width: 24”(610rnrn) approx.
Depth: 18” (450rnm) approx.
Height: 30” (900mm) approx.

Power supply: 220/240v l phase
Weight: 21Kg approx.

NOTE:
Only suitable for water based material