Pugmills

Code	Pugmills	Each
7600	2" MINI PUGMILL + GRID	1130.00
7601	3" MINI PUGMILL + GRID	1525.00
7601/MS	MICRO SWITCH for 7600 & 7601 (Replaces grid)	280.00
7615	STAND - for 7600/7601	206.00
.
7620	3" VERTICAL PUGMILL	2350.00
7625	4" VERTICAL PUGMILL	3450.00
.
7627	TILE EXTRUDER	5880.00
7627/1	TILE CUTTING TABLE	1600.00
7627/2	TILE EXTRUDING TABLE	1200.00

Code	Pugmill Add-ons	Each
7650/1	DIE PLATE - 6mm HOLE - for 7600	56.00
7650/2	DIE PLATE - 10mm HOLE - for 7600	56.00
7650/3	DIE PLATE - 13mm HOLE - for 7600	56.00
7651/1	DIE PLATE - 6mm HOLE - for 7601	95.00
7651/2	DIE PLATE - 10mm HOLE - for 7601	95.00
7651/3	DIE PLATE - 13mm HOLE - for 7601	95.00

7600 - 2" MINI PUGMILL + GRID

The economy range of pugmills has been specifically designed for the studio and classroom environment. They are compact and lightweight make them easily transportable. This model is fitted with a hopper safety grid and thermal overload safety switch as standard.

Technical Data
4” (100mm) Aluminium Body
2” (50mm) Extrusion Body and nose cone for easy cleaning
Individual nylatron blades mounted on a hexagonal steel shaft
Geared motor reduction drive
Single or three phase
Safety switch and overload starter
Output 190-200kg per hour approx.

Overall Dimensions
Height: 470mm approx
Width: 280mm approx
Length: 800mm approx
Weight: 36.5 Kg approx

7600/MS - 2" MINI PUGMILL + MICRO-SWITCH

This model has the same specification as 7600, but it is fitted with a interlocked hopper safety switch. This switch together with its high torque motor makes the pugmill extremely easy to load as there is no safety grid in the hopper to impede the flow of clay. When the loading handle is raised the machine switches off and then on again when the loading handle is lowered. Thermal overload safety switch is fitted as standard.

Overall Dimensions
Height: 470mm approx
Width: 280mm approx
Length: 800mm approx
Weight: 36.5kg approx

7601 - 3" MINI PUGMILL + GRID

The same compact design as the 2” Mini, but has a larger 150mm barrel with a 75mm (2in.)outlet. This version has a greater output and due to its larger hopper is easier to use than the smaller 2” model. A thermal overload switch is fitted as standard.

Technical Data
6” (150mm) aluminium body
3” (75mm) extrusion body and nose cone for easy cleaning
Individual aluminium blades mounted on a hexagonal steel shaft
Geared motor reduction drive
Single or three phase
Safety switch and overload starter
Output 300kg per hour approx

Overall Dimensions
Height: 500mm approx
Width: 280mm approx
Length: 800mm approx
Weight: 78kg approx.

7601/MS - 3" MINI PUGMILL + MICRO-SWITCH

The same specification as the 7601 version , but is ffitted with a interlocked hopper safety switch negating the need for a hopper grid.

Technical Data
6” (150mm) aluminium body
3” (75mm) extrusion, split body to facilitate easy cleaning, Individual aluminium blades mounted on a hexagonal steel shaft, geared motor reduction drive - single or three phase
Safety switch and overload starter,
Output 36Okg per hour approx

Overall Dimensions
Height: 500mm approx.
Width: 280mm approx.
Length: 800mm approx.
Weight: 78kg approx.

7620 - 3" VERTICAL PUGMILL

This vertical pugmill has a 150mm split aluminium barrel with a 75mm outlet and individual alloy blades mounted on a hexagonal shaft. It offers superior performance over conventional horizontal pugmills, but has the advantage of only taking up a 60cm x 60cm foot print. The pugmill is sturdily mounted on its own stand, which only requires securing to a suitable floor.

Technical Data
Drive: 0.75kW (1hp) with helical reduction gearbox
Construction: All aluminium body 150mm in diameter with a 75mm out let, fitted with Alloy blades mounted on a hexagonal shaft with taper roller bearings, split body for easy cleaning.
Thermal over load starter with safety interlocked switch
Output: 360kg per hour

Overall Dimensions
Depth: 711mm approx.
Width: 609mm approx.
Height: 1980 mm approx.
Weight: 123kg approx.

7625 - 4" DE-AIR VERTICAL PUGMILL

The 100mm (4” ) vertical pugmill is extremely powerful and robust with the ability to handle all types of clays. The main body is manufactured from aluminium, with a auger also made up of individual alloy blades. The auger is mounted through two taper thrust bearings and is driven via a flexible coupling by a 1.1kW (1.5hp) helical geared motor with a final drive output of 18rpm. It is fitted with a safety interlock switch which eliminates the need for a grid in the loading hopper and is supplied with a separate nose cone that is pre-drilled to enable the use of die plates for coil extruding.

Technical Data
Voltage 220—240 V, 50 Hz Single phase, 380— 415 V, 50 Hz Three phase.
Output: 700kg per hour approx.

Overall Dimensions:
Length: 760mm approx.
Width: 760mm approx.
Height: 2300mm approx.
Weight: 300kg approx.

7627 - TILE EXTRUDER

The tile extruder is a very versatile machine, besides extruding tiles, mouldings and coils etc can be extruded with the use of optional die plates. Using the standard 100mm dia. nose cone supplied with the machine enables other shapes, such as hollow forms to be extruded, again with the use of optional die plates. The tile extruder is a purpose designed machine for the extrusion of tiles. It has been designed around the standard de-airing pugmill, but using a larger higher torque motor gearbox unit. The machine is also fitted with a completely new nose cone outlet designed to enable tiles of approximately 280mm width by up to 25mm thick to be extruded. Smaller and /or thinner tiles can also be extruded by the use of accessory die plates fitted to the front of the nose cone.

Technical Data:
Construction: All aluminium alloy construction with split body to aid easy cleaning. Individual aluminium alloy blades mounted on a hexagonal shaft. Supplied with all switch gear and an interlocked hopper safety switch.
Motor gearbox unit: 2.2kW (3hp) single or three phase
Vacuum pump: High pressure rotary vane oil immersed –28” (-1 Bar)
Bearings: 2 adjustable taper roller bearings, oil seal and retaining plate.
Output: 60 -80 sq ft/ hour approximately. Output depends on clay body condition (softness), tile dimension, number of operators etc. With standard nose cone fitted out put is rated at 500kg per hour.

Overall Dimensions:
Length: 905mm approx.
Width:609mm approx.
Height: 1040mm approx.
Weight: 270kg approx.
Standard accessories:- 1- 150mm x 5mm die plate

Optional extras:
Extruding table
Ware boards
Tile cutting system
Die plates
Stainless steel auger

7627/1 - TILE CUTTING TABLE

This cutting table has been designed to compliment the tile extruder pugmill. The cutting system comprises a table with formica top. A central rotary shaft secured by sealed roller bearings, which are adjustable to allow for different thicknesses. On the shaft are mounted sixteen cutting discs. As the wareboard of extruded clay is pulled by the operating lever, the cuttings discs are pulled through the clay.

Overall Dimensions:
Length: 1910mm approx.
Width: 610mm approx.
Height: 760mm approx.
Weight: 70kg approx.

7627/2 - TILE EXTRUDING TABLE

Illustration not available

Another addition to compliment the tile extruding pugmill. The table consists of a rigid base supporting a fully adjustable top. The adjustment allows for varying thicknesses of extrusion. On the suraface of the table is a paper roll, which allows to extrusion to run without buckling.

Overall Dimensions:
Length: 1830mm approx.
Width: 510mm approx.
Height: 600mm variable