|
| 8700 - NICHROME WIRE |
|
|
Ideal for suspending beads etc. in earthenware firings. 19swg. Supplied in 10 feet lengths (3 metres approx.).
|
Size: 10 feet
Weight: |
| 8705 - KEVLAR MITTS |
|
|
A high quality heat resistant heavyweight glove made from KEVLAR® . These gloves are based on a high performance fibre known as a p-aramid which has extraordinary toughness and heat resistance. This fibre is stronger on an equal weight basis than steel, as well as being many times stronger than conventional fibres such as polyester, cotton and nylon, enabling gloves of exceptional cut resistance to be made. In addition to this remarkable property the material is inherently flame and heat resistant and will withstand limited exposure to 500° C.
|
Size:
Weight: |
| 8710/1 - RAKU TONGS |
|
|
Economically priced raku tongs desgined for lifting “red hot” pots direct from the chamber of raku kilns.
|
Size:
Weight: |
| 8711 - ABRASIVE STONE |
|
|
A ideal aid for getting rid of sharp glaze slithers after using stilts.
|
Size:
Weight: |
| 5100-500 - ALUMINA HYDRATE |
|
|
Good as an inexpensive batt wash. Can also be used a wash when firing clay against clay (firing lids in place) to prevent sticking. Available in 50gg, 2.5kg, 5kg, 10kg and 25kg pack sizes.
|
Size:
Weight: |
| 5111-500 - ZIRCON BASED BATT WASH |
|
|
A specially formulated mixture including zircon to produce an excellent glaze resistant batt wash. Mix with water and paint on the kiln shelves. Available in 500g, 2.5kg, 5kg, 10kg and 25kg pack sizes.
|
Size:
Weight: |
| 5170-500 - WHITE (PLACING) SAND |
|
|
Can be used as an alternative to batt wash on kiln batts. Spread a thin layer of sand on to the kiln batt and then place your work onto the batts. Available in 500g, 2.5kg, 5kg, 10kg and 25kg pack sizes.
|
Size:
Weight: |
|
|
