Morells Barn • Park Lane • Lower Bognor Road • Lagness • Chichester • West Sussex • PO20 1LR
Telephone: 01243 265845 • Fax: 01243 267582

LOW SHEEN GLAZES

• Non toxic Satin/Matt Glazes
• Firing range is cone 06 (999°C) to cone 04 (1060°C)
• 2 coat application of clear and 3 coats of the other to earthenware bisque
• All colors are fully intermixable
• Available in 140ml

USAGE
Chrysanthos Low Sheen Glazes are a premium range of satin glazes designed to create a low sheen finish on ceramic ware in an array of captivating colors.

Low Sheen Clear Glaze may be used over Underglaze and One Stroke decoration for a muted effect.

Low Sheen Glazes are for application to earthenware bisque and when fired correctly will seal and protect the ceramic ware from moisture and discolouration caused by contact with food and liquids.

Low Sheen Glazes are also fully intermixable. 


APPLICATION
To obtain optimum results, 2 - 3 thin coats of Low Sheen Glaze should be applied using a fan brush. Ensure each coat is dry before applying subsequent coats at right angles to one another (i.e. crosshatching).  Water may be added if necessary to thin the glaze to prevent bubbling or other imperfections.

In the case of the Low Sheen Clear, only 2 thin coats should be applied.


PHYSICAL DATA
For the best results, the Low Sheen Glazes should be fired to between cone 06 (999°C) and cone 04 (1060°C) on earthenware bisque that has been previously fired to between cone 04 (1160°C) and cone 03 (1101°C). A slow firing is preferable to ensure that the glaze has time to smooth out and produce a smooth silky finish.


SAFETY DATA
Ceramic ware that has been coated with Low Sheen Glazes may be used for the storage of food and beverages.

Always refer to the bottle and MSDS for all hazard and safety instructions.

For more information on our range of Low Sheen Glazes please see our 'Chrysanthos Colours & Brush-on-Glazes Book' here.

Back to Top